Tha adventure continues

Week 13 adventure was spent making some

cards using digital stamps, copics and the ZING.

Having seen this style of card on the  internet recently.

I liked it soo much that i knew i wanted to make a base card 

pattern of it  (little different to the ones i seen on the net as they 

had lots of scollops on the edges)

After making the base of the card pattern. with 13 panels needed 

to be filled I found it hard to think of what to put on them. 

Then i remembered that there would be enough of the Tess bears 

from alota to go on it somehow and here is what i came up with 

coloured by hand using copic markers

  Card One

(made 2 of this one)

 Card TWO (made 1 of this one)
this one looks the same but the bears are
 all different colours 

NEXT
Then I wanted to start learning a bit more about 
make the cut. So I spent nearly a week
watching youtubes and trying what they were
doing.
Here is a card I made. Colouring it all 
using svg into mtc and putting all pieces on
"each there own " and colouring each piece the 
colour that suited before printing and cutting.

HOWEVER i did shade with copics after the 

card was made up .

All stamps used in this post are ALOTA Rubber stamps

I am off to explore some more.

 If you live in Australia and New Zealand 

and wondering where you can get a KNK Zing 

SKAT KAT  is the place to find them