Scrap Factory Expanaion Packs

Thursday, November 01, 2012

Cupcake wrapper BASE (as seen Webinar on 30th/31st October 2012)

Once again I have done a demo (well several demos) this
week on the 30th/31st October 2012 Make the cut Webinar
This one to the question of how to make the cupcake bases
and how to work out how big to make the base .
(firstly I had worked out the demo before the webinar had
begun and when i started Bryan told me an easier way
so I will be showing his way  Thanks Bryan)

Lets BEGIN
After getting what you want on the cupcake and selection it
you then  conical warp it and on the second one it has
the size of the bottom diameter that is the size of the
circles you need for the base.
 Then you bring in 2 circles 2.25inches
 add tiny triangles and wrap like this
(click on photo to see bigger view)
Add the tab at the side for gluing 
and weld all them together
now you are ready to print and cut  or just cut .
Then this is what you have now
Roll and join at tab over lay
fold all the base triangles in
add glue to one of the circles   
and put some grease proof paper 
down to protect your mat
and place that circle into the wrapper
and press into place
now turn it over
Now at glue to other circle 
and put in place
Turn it back over and press firmly

now you have your cupcake wrapper with base
Be sure to check out the webinar when 
it is uploaded  over the next week or so .
Let me know what you think.
Designed in MAKE THE CUT  

I am off to  explore some more.
 If you live in Australia and New Zealand 
and wondering where you can get a KNK Zing 
SKAT KAT  is the place to find them




No comments:

Post a Comment